lordwelch/gokrazy-cm3588-kernel
1
0
Fork 0
Code Issues Pull Requests Actions 2 Packages Projects Releases Wiki Activity
8221c9c000
gokrazy-cm3588-kernel/kernel.patches/0022-RK3588-Add-Thermal-and-CpuFreq-Support.patch
Timmy Welch ea66aa9554 Attempt cm3588 support
2024-07-17 23:36:40 -07:00

759 lines
24 KiB
Diff
Raw Blame History

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alexey Charkov <alchark@gmail.com>
Date: Mon, 6 May 2024 13:36:32 +0400
Subject: arm64: dts: rockchip: add thermal zones information on RK3588
This includes the necessary device tree data to allow thermal
monitoring on RK3588(s) using the on-chip TSADC device, along with
trip points for automatic thermal management.
Each of the CPU clusters (one for the little cores and two for
the big cores) get a passive cooling trip point at 85C, which
will trigger DVFS throttling of the respective cluster upon
reaching a high temperature condition.
All zones also have a critical trip point at 115C, which will
trigger a reset.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 147 ++++++++++
1 file changed, 147 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/reset/rockchip,rk3588-cru.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/ata/ahci.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "rockchip,rk3588";
@@ -2368,6 +2369,152 @@ pwm15: pwm@febf0030 {
status = "disabled";
};
+ thermal_zones: thermal-zones {
+ /* sensor near the center of the SoC */
+ package_thermal: package-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ package_crit: package-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ /* sensor between A76 cores 0 and 1 */
+ bigcore0_thermal: bigcore0-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ bigcore0_alert: bigcore0-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ bigcore0_crit: bigcore0-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&bigcore0_alert>;
+ cooling-device =
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ /* sensor between A76 cores 2 and 3 */
+ bigcore2_thermal: bigcore2-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 2>;
+
+ trips {
+ bigcore2_alert: bigcore2-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ bigcore2_crit: bigcore2-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&bigcore2_alert>;
+ cooling-device =
+ <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ /* sensor between the four A55 cores */
+ little_core_thermal: littlecore-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 3>;
+
+ trips {
+ littlecore_alert: littlecore-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ littlecore_crit: littlecore-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&littlecore_alert>;
+ cooling-device =
+ <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ /* sensor near the PD_CENTER power domain */
+ center_thermal: center-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 4>;
+
+ trips {
+ center_crit: center-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 5>;
+
+ trips {
+ gpu_crit: gpu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ npu_thermal: npu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 6>;
+
+ trips {
+ npu_crit: npu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
tsadc: tsadc@fec00000 {
compatible = "rockchip,rk3588-tsadc";
reg = <0x0 0xfec00000 0x0 0x400>;
--
Armbian
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alexey Charkov <alchark@gmail.com>
Date: Mon, 6 May 2024 13:36:33 +0400
Subject: arm64: dts: rockchip: enable thermal management on all RK3588 boards
This enables the on-chip thermal monitoring sensor (TSADC) on all
RK3588(s) boards that don't have it enabled yet. It provides temperature
monitoring for the SoC and emergency thermal shutdowns, and is thus
important to have in place before CPU DVFS is enabled, as high CPU
operating performance points can overheat the chip quickly in the
absence of thermal management.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts | 4 ++++
arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi | 4 ++++
arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 4 ++++
arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts | 4 ++++
arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 4 ++++
arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts | 4 ++++
arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi | 4 ++++
arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 4 ++++
8 files changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts
@@ -673,6 +673,10 @@ regulator-state-mem {
};
};
+&tsadc {
+ status = "okay";
+};
+
&u2phy0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi
@@ -466,3 +466,7 @@ regulator-state-mem {
};
};
};
+
+&tsadc {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -1131,6 +1131,10 @@ &sata0 {
status = "okay";
};
+&tsadc {
+ status = "okay";
+};
+
&u2phy0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts b/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts
@@ -376,6 +376,10 @@ &sdmmc {
status = "okay";
};
+&tsadc {
+ status = "okay";
+};
+
&u2phy2 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -743,6 +743,10 @@ regulator-state-mem {
};
};
+&tsadc {
+ status = "okay";
+};
+
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts
@@ -648,6 +648,10 @@ regulator-state-mem {
};
};
+&tsadc {
+ status = "okay";
+};
+
&u2phy2 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
@@ -601,6 +601,10 @@ regulator-state-mem {
};
};
+&tsadc {
+ status = "okay";
+};
+
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -699,6 +699,10 @@ regulator-state-mem {
};
};
+&tsadc {
+ status = "okay";
+};
+
&u2phy0 {
status = "okay";
};
--
Armbian
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alexey Charkov <alchark@gmail.com>
Date: Mon, 6 May 2024 13:36:34 +0400
Subject: arm64: dts: rockchip: add passive GPU cooling on RK3588
As the GPU support on RK3588 has been merged upstream, along with OPP
values, add a corresponding cooling map for passive cooling using the GPU.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 14 +++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -2487,17 +2487,29 @@ center_crit: center-crit {
};
gpu_thermal: gpu-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&tsadc 5>;
trips {
+ gpu_alert: gpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
gpu_crit: gpu-crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert>;
+ cooling-device =
+ <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
npu_thermal: npu-thermal {
--
Armbian
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alexey Charkov <alchark@gmail.com>
Date: Mon, 6 May 2024 13:36:36 +0400
Subject: arm64: dts: rockchip: Add CPU/memory regulator coupling for RK3588
RK3588 chips allow for their CPU cores to be powered by a different
supply vs. their corresponding memory interfaces, and two of the
boards currently upstream do that (EVB1 and QuartzPro64).
The voltage of the memory interface though has to match that of the
CPU cores that use it, which downstream kernels achieve by the means
of a custom cpufreq driver which adjusts both at the same time.
It seems that regulator coupling is a more appropriate generic
interface for it, so this patch introduces coupling to affected
device trees to ensure that memory interface voltage is also updated
whenever cpufreq switches between CPU OPPs.
Note that other boards, such as Radxa Rock 5B, define both the CPU
and memory interface regulators as aliases to the same DT node, so
this doesn't apply there.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 12 ++++++++++
arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts | 12 ++++++++++
2 files changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -878,6 +878,8 @@ regulators {
vdd_cpu_big1_s0: dcdc-reg1 {
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_big1_mem_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
@@ -890,6 +892,8 @@ regulator-state-mem {
vdd_cpu_big0_s0: dcdc-reg2 {
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_big0_mem_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
@@ -902,6 +906,8 @@ regulator-state-mem {
vdd_cpu_lit_s0: dcdc-reg3 {
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_lit_mem_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
@@ -926,6 +932,8 @@ regulator-state-mem {
vdd_cpu_big1_mem_s0: dcdc-reg5 {
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_big1_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
@@ -939,6 +947,8 @@ regulator-state-mem {
vdd_cpu_big0_mem_s0: dcdc-reg6 {
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_big0_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
@@ -963,6 +973,8 @@ regulator-state-mem {
vdd_cpu_lit_mem_s0: dcdc-reg8 {
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_lit_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
@@ -833,6 +833,8 @@ vdd_cpu_big1_s0: dcdc-reg1 {
regulator-name = "vdd_cpu_big1_s0";
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_big1_mem_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
@@ -846,6 +848,8 @@ vdd_cpu_big0_s0: dcdc-reg2 {
regulator-name = "vdd_cpu_big0_s0";
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_big0_mem_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
@@ -859,6 +863,8 @@ vdd_cpu_lit_s0: dcdc-reg3 {
regulator-name = "vdd_cpu_lit_s0";
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_lit_mem_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
@@ -885,6 +891,8 @@ vdd_cpu_big1_mem_s0: dcdc-reg5 {
regulator-name = "vdd_cpu_big1_mem_s0";
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_big1_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
@@ -899,6 +907,8 @@ vdd_cpu_big0_mem_s0: dcdc-reg6 {
regulator-name = "vdd_cpu_big0_mem_s0";
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_big0_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
@@ -925,6 +935,8 @@ vdd_cpu_lit_mem_s0: dcdc-reg8 {
regulator-name = "vdd_cpu_lit_mem_s0";
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&vdd_cpu_lit_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
--
Armbian
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alexey Charkov <alchark@gmail.com>
Date: Mon, 6 May 2024 13:36:37 +0400
Subject: arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
By default the CPUs on RK3588 start up in a conservative performance
mode. Add frequency and voltage mappings to the device tree to enable
dynamic scaling via cpufreq.
OPP values are adapted from Radxa's downstream kernel for Rock 5B [1],
stripping them down to the minimum frequency and voltage combinations
as expected by the generic upstream cpufreq-dt driver, and also dropping
those OPPs that don't differ in voltage but only in frequency (keeping
the top frequency OPP in each case).
Note that this patch ignores voltage scaling for the CPU memory
interface which the downstream kernel does through a custom cpufreq
driver, and which is why the downstream version has two sets of voltage
values for each OPP (the second one being meant for the memory
interface supply regulator). This is done instead via regulator
coupling between CPU and memory interface supplies on affected boards.
This has been tested on Rock 5B with u-boot 2023.11 compiled from
Collabora's integration tree [2] with binary bl31 and appears to be
stable both under active cooling and passive cooling (with throttling)
[1] https://github.com/radxa/kernel/blob/stable-5.10-rock5/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
[2] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/u-boot
Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 122 ++++++++++
1 file changed, 122 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 111111111111..222222222222 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -97,6 +97,7 @@ cpu_l0: cpu@0 {
clocks = <&scmi_clk SCMI_CLK_CPUL>;
assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
assigned-clock-rates = <816000000>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -116,6 +117,7 @@ cpu_l1: cpu@100 {
enable-method = "psci";
capacity-dmips-mhz = <530>;
clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -135,6 +137,7 @@ cpu_l2: cpu@200 {
enable-method = "psci";
capacity-dmips-mhz = <530>;
clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -154,6 +157,7 @@ cpu_l3: cpu@300 {
enable-method = "psci";
capacity-dmips-mhz = <530>;
clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <32768>;
i-cache-line-size = <64>;
@@ -175,6 +179,7 @@ cpu_b0: cpu@400 {
clocks = <&scmi_clk SCMI_CLK_CPUB01>;
assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
assigned-clock-rates = <816000000>;
+ operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -194,6 +199,7 @@ cpu_b1: cpu@500 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+ operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -215,6 +221,7 @@ cpu_b2: cpu@600 {
clocks = <&scmi_clk SCMI_CLK_CPUB23>;
assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
assigned-clock-rates = <816000000>;
+ operating-points-v2 = <&cluster2_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -234,6 +241,7 @@ cpu_b3: cpu@700 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+ operating-points-v2 = <&cluster2_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -348,6 +356,120 @@ l3_cache: l3-cache {
};
};
+ cluster0_opp_table: opp-table-cluster0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <675000 675000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <712500 712500 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <762500 762500 950000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <850000 850000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <950000 950000 950000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
+ cluster1_opp_table: opp-table-cluster1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <725000 725000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <762500 762500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <850000 850000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-microvolt = <925000 925000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-microvolt = <987500 987500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
+ cluster2_opp_table: opp-table-cluster2 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <675000 675000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <725000 725000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <762500 762500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <850000 850000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-microvolt = <925000 925000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-microvolt = <987500 987500 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ opp-microvolt = <1000000 1000000 1000000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
display_subsystem: display-subsystem {
compatible = "rockchip,display-subsystem";
ports = <&vop_out>;
--
Armbian
Reference in New Issue View Git Blame Copy Permalink